Cut stone blocks stacked at the foot of a quarry face under a clear sky

Products

Equipment

Diamond wire, cutting machines and drilling equipment for quarries and hard rock mines. Tell us your stone and bench and we can advise on what suits it.

Enquire about equipment Chat on WhatsApp

How we supply

Built to spec

Buner granite, Dir black granite and Mohmand marble each need a different wire. The right settings depend on the rock, the bench height and the water available:

Bead count
Diamond concentration
Sheath build
Machine power

Tell us your stone and bench when you enquire and we can advise on what suits it.

Bead countDiamond concentrationSheath buildMachine power

Diamond Wire

Diamond wire for quarry extraction, slab processing and concrete cutting. The wrong wire costs block yield, machine hours and money, so tell us your stone and we can advise on the right wire.

Granite Quarry Diamond Wire

Primary cutting wire for granite, quartzite and other hard stone in open quarry conditions.

Rubber moulded construction for hard stone and high tension work
Bead concentration matched to rock hardness on a per site basis
Supplied in continuous lengths, joined on site with our jointing kit
Wet cutting, requires water supply at the cut

Price on request

Enquire about this

Two coils of diamond cutting wire, sintered beads spaced along the steel cable

Marble and Soft Stone Diamond Wire

Marble, limestone, travertine and other soft to medium stone.

Spring or plastic sheath, built for soft and medium stone
Faster cutting rate than hard stone wire on the same face
Lower cost per metre than rubber moulded granite wire
Clean kerf reduces downstream trimming loss

Price on request

Enquire about this

Multi Wire Rope for Slab Processing

Factory cutting of blocks into slabs on multi wire machines.

Wire diameter 0.45mm to 0.65mm
Material yield above 97 percent
Cutting speed 1.5 to 2 times conventional methods
Cuts marble through to granite and quartzite

Price on request

Enquire about this

Steel and Concrete Cutting Diamond Wire

Demolition, reinforced concrete, steel structures, bridge and pile cutting, underwater work.

Cuts reinforced concrete, steel and iron sections
Suitable for underwater cutting
No impact or vibration damage to surrounding structures
Used on bridges, piles, chimneys and industrial demolition

Price on request

Enquire about this

Cutting Machines

Machines that cut blocks from the ore body and trim them square before transport.

Diamond Wire Saw Machine

Primary block extraction in granite and marble quarries.

Cuts vertically and horizontally
Full sawing extraction or combined with drill and split methods
Delivers square blocks with minimal fracture loss

Price on request

Enquire about this

Diamond wire saw machine on a quarry bench

High Efficiency Wire Saw Machine

Quarry extraction where power cost or power supply quality is a constraint.

Permanent magnet drive, up to 30 percent more efficient
Constant torque across full frequency range
High pulling torque at low frequency for easy starting under load
Built for wide voltage variation and unstable supply

Price on request

Enquire about this

Portable Trimming Wire Saw

Squaring and trimming extracted blocks at the quarry or the yard.

Portable, moves easily between benches and yards
Trims and squares blocks before transport
Cuts freight cost by removing waste stone at source
Improves block presentation and sale value

Price on request

Enquire about this

Chain Saw Quarrying Machine

Dry cutting of marble, limestone and soft stone. High bench quarrying.

Dry cutting, no water supply required
Suited to high altitude, cold and arid sites
Cut depths 3200mm, 4500mm and 5600mm, custom available
Automatic hydraulic adjustment to stone hardness

Price on request

Enquire about this

Drilling

Hole, sample and free face drilling for quarry and hard rock mining, with the matching consumables.

DTH Drilling Machine

Blast hole and free face drilling in quarry and hard rock mining.

Pneumatic, pneumatic electric or hydraulic drive options
Hole diameter 65mm to 165mm depending on configuration
Quick release rod change
Full consumable range available

Price on request

Enquire about this

Horizontal Core Boring Machine

Horizontal holes for wire threading, geological sampling and exploration.

Drills the connecting holes required for wire saw threading
Core drilling for geological sampling and lease assessment
Core and coreless bit options
Works alongside wire saw and DTH equipment as a system

Price on request

Enquire about this

A down the hole button bit, tungsten carbide buttons set across the face and gauge

DTH Button Bits

Blast hole and free face drilling. The wearing end of a down the hole hammer.

Face options flat, convex, concave and double gauge
Button shapes round, semi ballistic, ballistic, flat and sharp
Gauge and thread matched to the hammer already on site
Matched to the hammers we sell

Price on request

Enquire about this

Consumables and Tooling

Beads, segments and other parts that wear out in use. A missing bead or a stripped segment can stop a quarry as readily as a failed machine, so we sell them alongside the machines and quote them by the set.